To make better coffee at home, use fresh coffee, match the grind to your brewing method, measure your coffee and water, and keep your equipment clean. Start with a recipe you can repeat, then change one thing at a time so you can tell what improves the taste.
How to choose coffee you'll enjoy
Buy coffee for the drink you enjoy. Start with a medium roast if you like balanced black coffee or coffee with a little milk. If you prefer a stronger roasted flavour in milky coffee, try a medium-dark roast. Very dark coffee can taste smoky or bitter.
Look for a roast date rather than relying only on the best-before date. Buy enough to last a few weeks after opening, and choose whole beans if you have a suitable grinder. If you don't, buy smaller packs ground specifically for your brewing equipment.
Store your coffee in an airtight, opaque container away from the stove, sunlight and moisture. Avoid keeping your everyday supply in the fridge, where repeated opening can expose it to moisture and food odours.
If you buy a coffee-chicory blend, check the proportion on the pack. Chicory changes the flavour and body, so don't expect a blend to taste like pure coffee, even with the same recipe.
Which grind size should you use?
Your grind size affects how readily water extracts soluble flavour compounds from coffee. If you grind too fine, you can slow drainage and get a harsh taste. If you grind too coarse, water can pass through before extracting enough flavour.
- Use a coarse grind for a French press, then adjust if your coffee tastes thin or harsh.
- Start with a medium grind for a drip machine and a medium-fine grind for a cone-shaped pour-over.
- Choose a fine grind intended for a traditional metal coffee filter, but avoid powder that blocks its holes.
- Use an espresso-fine grind for an espresso machine, following the instructions for your basket and machine.
A burr grinder gives you more evenly sized particles than a blade grinder, so you can repeat your grind settings more reliably. If you use a blade grinder, work in short pulses and gently shake it between pulses to reduce uneven grinding. Grind only what you need for your next brew.
How much coffee and water should you use?
For black filter coffee, start with 1 gram of coffee to 16 grams of water. For example, use 15 grams of coffee with 240 grams of water. Treat this as a starting recipe, not a rule for espresso or concentrated filter decoction, and adjust it to your taste.
Use a small digital kitchen scale rather than counting spoonfuls. Different beans and grind sizes take up different amounts of space, so you won't always get the same weight of coffee in a spoonful. Measure the water you put into the brewer, not just the drink you collect afterwards.
If the flavour is balanced but too light, use slightly more coffee or less water. If it tastes balanced but too strong, add a little hot water after brewing. Keep your grind size and brewing time unchanged while you test the ratio.
What water and temperature should you use for coffee?
Use drinking water that tastes clean on its own. If you notice a chlorine smell, saltiness or a strong mineral taste, you may taste it in your coffee too. If your tap water tastes unpleasant, compare it with filtered drinking water before changing your coffee.
For most hot brewing methods, aim for roughly 90°C to 96°C, the range recommended by the National Coffee Association. If you don't have a temperature-controlled kettle, let freshly boiled water stand briefly before pouring. The exact cooling time depends on your kettle and how much water you've boiled.
Start near the hotter end for light roasts and try slightly cooler water if a dark roast tastes harsh. Preheat your mug and brewer with hot water, then discard the water, especially when you're making a small serving.
How to improve your brewing technique
Follow the same method each time rather than adding extra stirring, pressing or pouring whenever your coffee looks weak. Use these techniques as starting points to control how the water comes into contact with the coffee.
- For a French press, wet all the grounds, stir gently and steep for about four minutes to start with. Press slowly and pour out the coffee promptly rather than leaving it on the grounds.
- For a pour-over, rinse the paper filter and discard the rinse water. Wet the grounds evenly, wait about 30 seconds, then pour steadily in small circles. Avoid repeatedly pouring against the sides of the paper filter.
- For a traditional coffee filter, spread the grounds evenly and use the pressing disc gently if your filter comes with one. Add hot water without stirring the grounds, and let the decoction drip through without forcing it.
For milk coffee, brew a concentrated base rather than adding plenty of milk to normal-strength black coffee. Add heated milk gradually and taste as you go. Avoid repeatedly boiling the milk, as this can give it a cooked flavour and cause a skin to form.
Rinse your brewer after every use and wash removable parts with a suitable detergent, following the manufacturer's instructions. Clean mesh filters and grinder parts regularly, and descale kettles or machines as instructed. If you leave old coffee oils or blocked filters in your equipment, they can spoil an otherwise good brew.
How to fix bitter, sour or weak coffee
Change one variable at a time and note the result. Keep your coffee, dose and water quantity constant while testing a grind adjustment, so you know what caused the difference.
If your coffee tastes bitter and leaves your mouth feeling dry, try a slightly coarser grind or a shorter steep. Check that your equipment is clean. If you still taste bitterness, try a lighter roast.
If your coffee tastes sharply sour and thin, try a finer grind, hotter water or a longer steep, testing each separately. Some beans naturally taste fruity or acidic, so consider a medium roast if you prefer less acidity.
If your coffee tastes weak but otherwise pleasant, increase the coffee dose. If it tastes muddy, use a coarser, more consistent grind, check the filter and pour gently to leave settled grounds behind.